If you are not running Maple on one of the machines in SH 306, the procedure described above has to be modified. If you are using Maple on host stat in KH 207, then you can use either of the printer commands lpr -Pstat1 or lpr -Pstat2. The two printers are located in a small room at the back of KH 207. If you are not in SH 306 or KH 207, then your best bet is to use the command lpr -Plps20. Note, however, that you will have to go to the CCC I/O area to pick up your output and that it will cost $.10 per page.